Clip on for Harley Davidson

Read this solution for your Harley with a little expense.

Harley Davidsons are very fascinating motorcycle, which every owner wants to customize in order to make them unique. There are not two identical Harley in this World. A lot of owner use very high handlebars, which mean that the rider leans backwards during the driving and loads more weight on the rear part of the motorcycle. This weight shift implies a set of problems on the dynamics of the bike. Shifting the weight backwards, in fact, we load less the front wheel: as result, we will have less power of braking and the sinking of the fork will fall.

What happens if the front wheel does not have enough weight?

Clip on for Harley Davidson

When we start to brake intensely with the front brake, if the handlebar is original, there is a load of circa 40% of the total weight (motorcycle + rider) on the front wheel. Knowing that friction between wheel and asphalt depends proportionally on the load over the front wheel, it is clear that reducing the percentage of total weight downloaded on the front wheel, there might be possible to stop it totally. In this case, the limit of braking is given by the adherence of the tire to the ground. The friction in this moment will be quite low, because we don’t have enough load on the front wheel, and that might lead to the classic “front closure”.

If we use a low handlebar, instead, our body will be more tilted forward and we will load more weight on the front wheel; in this way, the friction will be greater, and we will not risk blocking the wheel.

As we have seen, it is clear that everyone should lower the handlebars instead of raising it up, especially if we want to drive safely and faster.

FreeSpirits suggests you the same solution used on racetrack, that is the usage of the clip on handlebars.

Clip on for Harley Davidson

Using the clip-on handlebars let you have a better feeling with the front, in fact, being directly connected to the fork, there will be more sensibility on your hands and every movements of the front wheel will reach your hands. You will be free to drive at best your motorcycle.

The style and the driving position will change, and you will discover a new soul of your Harley Davidson.

Compared to other kits which can be found on the marketplace, the kit by FreeSpirits can be assembled easily, without the need to remove the top yokes. In this way, the change of the standard handlebars with the new clip on handlebars will be very fast.

Clip on for Harley Davidson

As FreeSpirits tradition, every modification is completely reversible, and you will be able to come back at your standard handlebars whenever you want.

The collars of support are made from a single block of aluminum, thanks to high-level cnc techniques. Then, they are black anodized and this allows the collars to bear very high stresses without any deformations.

Thanks to the clip-on handlebars, attached directly to the fork, it will be possible to rotate the clip on handlebars and open or close them according to rider’s needs. This will make more comfortable the use of the motorcycle to riders of any heights.

Give more charm to your Harley and more safety to your ride. Choose the quality, choose the made in Italy of FreeSpirits.

Clip on for Harley Davidson

For more info visit:

0 1.29 K